SPECIALISTS IN METAL STAMPING TECHNOLOGY
SMALL
WIDTH COIL PROCESSING
|
|
|
|
FROM RETROFIT TO TURNKEY
SYSTEM,
|
 |
|
FEEDING
 | Servo Driven Roll Feeds |
| Two-Roll Servo Feeds |
| Four-Roll Servo Feeds |
| Zig-Zag Servo Feeds |
|
 |
|
| |
STRAIGHTENING
| Special Edition Straighteners |
| Heavy Duty Straighteners |
| High Performance Straighteners |
| Combination Cradle Straighteners |
|
 |
|
|
UNCOILING
| Single Payoff Reels |
| Double Payoff Reels |
| Coil Cars and Cradles |
|
 |
COIL HANDLING SYSTEMS
| Rugged coil feeding systems to accommodate stock up to 78"
wide, .500" thick and coils weighing up to 50,000 lbs. |
|
click to enlarge
|
CIECO
PRESS ROOM CONTROLS
|
|
|
|
PPC-1000
|
PPC-1000
Cam-based Press Control.
PPC1000 is a low-cost press control that uses a rotary
cam for positioning and has a message center for fault
read out.
This is a great control for PLC applications to
eliminate the high cost of dual PLC packages. Use the
PPC-1000 for safety and use the PLC for your none safety
control. All faults can be reported back to the PLC
through the PLC interface.
|
|
PPC-1100R
|
PPC-1100R
Low Cost resolver based safety press control. The
PPC1100R is a safety press control with a programmable
real time Brake Monitor, one Die Protection input
and two Counters. Two optional programmable limit
switches are also available.
Eliminate the high cost of dual PLC's by using the
PPC-1100R for your clutch/brake safety control and your
PLC for any automation non-safety control. All
faults can be reported back to the PLC through the PLC
interface.
|
|
PPC-1000R
|
PPC-1000R
Low Cost Press Automation Control.
PPC1000R is a resolver based safety press automation
control. Six programmable limit switches, eight die
protection sensor inputs and counters are standard.
Options for more inputs, outputs, load monitor and
ethernet are available.
|
|
Automator I
|
Automator I Press
Automation Control.
The Automator I is an automation press control using a
resolver for positioning. A slotted rack design allows
options for die protection, programmable limit switches,
load monitor, shut height, counter balance, cushion
control, ethernet and many others.
|
|
Automator II
|
Automator II
Metal Stamping Press Control.
The Automator II adds enhanced functionality to the
original Automator I, with it’s 15” color touch
screen and vivid graphics. Other new features include
advanced communications with ethernet, USB and RS232
connections; down load digital photos of die set up with
notes and electrical press motor and control schematics
and more. The same rack design as the original Automator
that allows options for die protection, programmable
limit switches, load monitor, shut height, counter
balance, cushion control, ethernet and others.
|
|
|
081607 |
